> For the complete documentation index, see [llms.txt](https://docs.stakingrewards.com/staking-data/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://docs.stakingrewards.com/staking-data/methodologies/waterfall-srb.md).

# Waterfall SRB

Learn how Waterfall staking rewards are calculated. WATERSRB formula covers the beacon-chain square-root issuance curve, total validator balance, and the 32,000 WATER validator deposit.

WATERSRB is a benchmark representing the mean, annualized staking rate across all active Waterfall validators.

WATERSRB is calculated and published by Staking Rewards via the [Waterfall Profile](https://www.stakingrewards.com/asset/waterfall) and [Data API](https://www.stakingrewards.com/data-api).

> **TL;DR:** Waterfall is a DAG-based Proof-of-Stake network whose beacon chain mints validator rewards on a square-root curve: total annual rewards grow with the square root of the staked amount, so the rate per staked token falls as more WATER is staked. WATERSRB applies that curve to the total balance held by validators. Each validator requires a fixed 32,000 WATER deposit; there is no delegation and no protocol-level commission.

### WATER Staking Rewards Rate: WATERSRB

$$
WATERSRB = R\_{opt} \times \sqrt{S\_{opt} / S}
$$

which is the protocol's annual reward amount $$V = R\_{opt} \times \sqrt{S\_{opt} \times S}$$ divided by $$S$$.

<table><thead><tr><th width="149">Formula key</th><th width="180">Metric name</th><th>Description</th></tr></thead><tbody><tr><td>R<sub>opt</sub></td><td>Base Reward Factor</td><td>The beacon-chain base reward factor, 0.2 (20%) on mainnet.</td></tr><tr><td>S<sub>opt</sub></td><td>Optimal Stake</td><td>The beacon-chain stake scale, 300,000 × 32,000 = 9,600,000,000 WATER on mainnet.</td></tr><tr><td>S</td><td>Staked Tokens</td><td>The total balance held by Waterfall validators, from the block explorer's daily balance snapshot (validatorTotalBalance). It includes balance above the 32,000 WATER effective-balance cap and residual balance on exited validators.</td></tr></tbody></table>

* WATERSRB is non-compounded, excluding returns from reinvestment of rewards.
* WATERSRB includes both claimed and unclaimed rewards.
* WATERSRB is the rate given by the protocol's issuance curve, i.e. the maximum reward a validator earns with full participation. Rewards for missed or late attestations are withheld by the protocol, so realised rewards run slightly below it (about 98% of the maximum in a September 2026 sample).
* Transaction fees are excluded as immaterial: the base fee is about 89 WATER per day, two thirds of which is burned, against an issuance of about 1.35 billion WATER per year.

{% hint style="info" %}
**Open methodology question.** The beacon chain computes rewards on effective balance, which is capped at 32,000 WATER per validator (N × 32,000 for N active validators), while WATERSRB uses the total validator balance S. With about 148,000 active validators, S exceeds N × 32,000 by roughly 17%, so the published rate is lower than the per-deposit maximum on effective balance (26.4% vs 28.5% in October 2026) and Rewards Per Year is about 8% above the issuance curve evaluated on effective balance. Whether S should be the effective balance is under review; this page describes what is published.
{% endhint %}

#### Slashing

* WATERSRB does not factor in the possibility of slashing occurrences.

***

### WATER Validator Staking Reward Rate: WATERSRB(v)

Waterfall has no protocol-level commission, and each validator stakes its own fixed 32,000 WATER deposit. The validator reward rate is therefore the asset benchmark.

$$
WATERSRB(v) = WATERSRB \times (1 - c), \quad c = 0
$$

<table><thead><tr><th width="149">Formula key</th><th width="180">Metric name</th><th>Description</th></tr></thead><tbody><tr><td>c</td><td>Commission</td><td>Waterfall has no protocol-level commission, so c is 0 for every validator.</td></tr></tbody></table>

Staking Rewards publishes Waterfall validator data aggregated per staking provider (Waterfall, Piconbello, Infstones) rather than per individual validator. Each provider's staked tokens are its share of the active validator balance multiplied by S. Validators the block explorer does not attribute to a provider are not included in any provider aggregate. A provider's Staking Wallets figure is its number of active validators, not a count of delegator addresses, since Waterfall has no delegation.

***

#### Observation Period:

1. The WATERSRB is determined from the latest validator list and the block explorer's daily balance snapshot at the point of evaluation.
2. This data is then annualized for a comprehensive year-long projection.

#### Calculation

The calculation happens every 2 hours and is immediately published via [Data API](https://www.stakingrewards.com/data-api).

#### Limitations

1. WATERSRB employs a 365-day convention for annualizing staking rewards. This convention remains consistent and does not accommodate adjustments for leap years.
2. WATERSRB is the issuance-curve rate (full participation). It does not measure realised rewards, which are slightly lower when validators miss attestations.
3. S is a daily snapshot, so WATERSRB can lag intraday changes in the total validator balance by up to a day.
4. S is the total validator balance rather than the effective balance the protocol computes rewards on (see the open methodology question above).
5. Transaction fees are not included.
6. No guarantee that individual validator rates will match WATERSRB(v) exactly.

***

### WATER Real Reward Rate: WATERSRB^R

The real reward rate calculates the WATERSRB adjusted for inflation in the network.

$$
WATERSRB^R = (1 + WATERSRB) / (1 + ir) - 1
$$

<table><thead><tr><th width="149">Formula key</th><th width="180">Metric name</th><th>Description</th></tr></thead><tbody><tr><td>ir</td><td>Inflation Rate</td><td>The protocol's maximum annual mint divided by total supply: R<sub>opt</sub> × 32,000 × √(300,000 × N) / totalSupply, where N is the number of active validators and totalSupply is the sum of user and validator balances in the block explorer's daily balance snapshot.</td></tr></tbody></table>

**Inflation Rate Behavior**

* New WATER is minted as beacon-chain validator rewards. The annual maximum mint is R<sub>opt</sub> × √(S<sub>opt</sub> × N × 32,000), the issuance curve evaluated on the effective balance of the N active validators (32,000 WATER each). It grows with the square root of the validator count.
* The inflation rate is the protocol maximum. Realised issuance runs slightly below it (about 98% in a September 2026 sample) because rewards for missed or late attestations are withheld.
* Because the mint grows with √N while supply grows with every mint, the inflation rate declines over time unless the validator count rises.
* The inflation rate is omitted for a run, never published as 0, when the supply snapshot is missing, older than 7 days or implausible, when the validator list cannot be read, or when the result falls outside a plausibility band of 2% to 8%. The real reward rate is then omitted as well.

***

### Other Waterfall metrics calculated by Staking Rewards:

<table><thead><tr><th width="190">Metric</th><th>Description</th></tr></thead><tbody><tr><td>Staked Tokens</td><td>The total balance held by Waterfall validators (S), from the block explorer's daily balance snapshot.</td></tr><tr><td>Rewards Per Year</td><td>Staked tokens × WATERSRB, in WATER (equivalently R<sub>opt</sub> × √(S<sub>opt</sub> × S)).</td></tr><tr><td>Active Validators</td><td>The number of validators with status active in the validator list.</td></tr><tr><td>Inactive Validators</td><td>The number of validators with any other status (currently exited).</td></tr><tr><td>Total Validators</td><td>Active plus inactive validators.</td></tr><tr><td>Benchmark Commission</td><td>0. Waterfall has no protocol-level commission.</td></tr></tbody></table>

* Total and eligible supply (equal) and circulating supply (total minus the explorer's ignored user and validator balances) come from the Waterfall explorer's daily balance snapshot, and are published only when that snapshot passes its age and plausibility checks. Staking Ratio is staked tokens over eligible supply.
* Price and USD-denominated metrics (market cap, Rewards Per Year in USD) are not published: no live WATER price source exists.
* The solo-staking reward option requires the 32,000 WATER validator deposit and has no lockup period.

***

#### Data Sources:

* Staking Rewards from the Waterfall block explorer API (validator list and daily balance statistics)
* The Waterfall beacon-chain issuance formula (base reward calculation, mainnet parameters)

***

#### References:

* [Waterfall Economics](https://docs.waterfall.network/overview/economics/)
* [Waterfall Documentation](https://docs.waterfall.network/)

***

:books: [Learn more about WATER Staking](https://www.stakingrewards.com/asset/waterfall)

:bar\_chart: [Calculate your WATER Staking Rewards](https://www.stakingrewards.com/calculator?asset=waterfall)

:gear: [Access historic Waterfall Staking Data via API](https://www.stakingrewards.com/data-api)

```
Last updated on 11/04/2026
```
